Skip to content
PT SCBI

Record · Quality

Size Consistency: The Caliper Log of Our Shisha Charcoal and How to Check Size on Arrival

This record belongs to the quality section and shows how the size of this factory's shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, is checked and what the checks measured. It is written for the importer or quality manager who wants size to hold from one container to the next. It gives the tolerance, the check and the log, and a check to repeat on arrival.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
3 min read

Quick answer

How is the size of this factory's shisha charcoal checked, and how do I check it on arrival?

Size is checked with a digital caliper on 20 pieces 4 times a day, and the log shows each check's mean, smallest and largest piece. The tolerance stated for these coconut shell charcoal briquettes is ±0.3 mm per side, and a buyer can repeat the same check on arrival with a caliper.

Size-deviation log: 1 confirmed record from 2026-11-12 to 2026-11-12. Per production batch.
Date BatchShape and sizeNominal (mm)Pieces measuredMeasured mean (mm)Smallest (mm)Largest (mm)Deviation of the mean (%)Outside tolerance
2026-11-12Cube 26 mm262026.025.726.20.00

Method: Twenty pieces of a batch are measured with a digital caliper 4 times a day, and each check is written down: the mean, the smallest and the largest piece, and the number of pieces outside the size tolerance.

Last updated 2026-11-12 · re-checked at least every 90 days · next due by 2027-02-10.

1. What size tolerance is

Size tolerance is how far a piece may measure from its nominal size and still be in specification.

Definition

size tolerance

Size tolerance is the permitted deviation of a briquette's measured dimensions from the nominal size, stated per side as a percentage or in millimeters and checked with a caliper on a fixed number of pieces.

The tolerance stated for every shape, size and grade is ±0.3 mm per side. That is the tolerance the factory states; the log on this page shows what each check measured. The nominal sizes of each shape are on the shapes and sizes page.

How facts on this page are confirmed is set out in the editorial and review policy.

2. How size is checked at the factory

Size is checked with a digital caliper on 20 pieces, 4 times a day, and each check is written down.

Each check records the mean of the pieces measured, the smallest and the largest piece, and how many fall outside the tolerance, so a drift in size shows in the log. The pieces are formed and cut to length at the pressing and cutting station, where size is set.

3. The size log

The log sits at the top of this page, newest check first, with the method it is kept by and the date it was last checked.

  • Batch, shape and nominal size. What was measured.
  • Pieces measured, mean, smallest and largest. The readings of the check, in mm.
  • Deviation of the mean and outside tolerance. How far the mean sits from nominal, and how many pieces fell outside.

The newest check, on November 12, 2026, measured 20 pieces of 26 mm cubes: a mean of 26.0 mm, the smallest 25.7 mm and the largest 26.2 mm, with none outside the tolerance. No buyer appears in a row.

4. Checking size on arrival

The same check can be repeated on arrival, so your reading and the factory's can be compared.

  1. Step 1

    Take pieces from several cartons

    Not from one box. Open cartons from different rows of the container and take 20 pieces, as the factory does at each check.

  2. Step 2

    Measure each piece

    With a caliper. Measure each side of each piece with a digital caliper and write the readings down.

  3. Step 3

    Compare with the tolerance

    Against ±0.3 mm per side. Count the pieces outside the tolerance, and note the smallest and the largest reading.

  4. Step 4

    Photograph and report

    With the carton marks. Photograph the readings with the carton marks visible and send them to the export desk, within 14 days of arrival of the container at the buyer's warehouse.

A finding is set against the batch's record and its retained sample under the claims process. Size is held to the sample you approved, as set out in how size is held from sample to container, where the golden sample is the reference.

Questions buyers ask

How is size checked at the factory?
With a digital caliper on 20 pieces, 4 times a day. Each check is written down: the mean, the smallest and the largest piece, and the number of pieces outside the tolerance.
Do all pieces measure exactly the nominal size?
No. Each piece varies within the tolerance. In the check of November 12, 2026 on 26 mm cubes, the mean was 26.0 mm, the smallest piece 25.7 mm and the largest 26.2 mm, with no piece outside the tolerance.

Use the data before you order

Request a sample from current production and compare it with the latest rows.