Skip to content
PT SCBI

Guide

Request a 1 kg shisha charcoal sample — what you receive and what to do with it

This guide sits under the home page and is written for wholesale buyers planning a container of shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, who want to test before any money moves. It sets out what a sample from the factory contains, who pays the courier and what to check when the parcel arrives. Ask for 1 kg per shape and grade, pay the courier, and run five checks.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
5 min read
A 1 kg sample of shisha charcoal per shape and grade is enough for a burn test, a caliper check of ten pieces and a drop test of ten pieces.

Quick answer

How does a buyer get a sample from this factory, and what should they do with it?

A sample is 1 kg per shape and grade, shipped with its batch COA; the buyer pays the courier and tests it against that COA. Several shapes and grades of shisha charcoal can travel in one parcel. Test weight and count, dimensions, ash, ignition and burn, and smell under one fixed setup, and keep the record sheet for the format you choose.

1. What is in the sample box

A sample parcel holds 1 kg of briquettes for each shape and grade you ask for, within the factory's free allowance.

Definition

shisha charcoal sample

A shisha charcoal sample is a small parcel of coconut shell charcoal briquettes, typically 1 kg of each shape and grade, drawn from a production batch and sent to a prospective buyer with that batch's certificate of analysis, so the buyer can test the product before ordering a container.

What a sample request to this factory brings: the briquettes, the allowance and cost, the courier, the shapes and grades on offer and the batch reference, as confirmed by the factory in November 2026.
ItemWhat to expect
Briquettes 1 kg for each shape and grade you request
Allowance and cost Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS)
Courier DHL or EMS, paid by the buyer
Shapes you can request Cube, cube with hole, hexagonal, finger (stick), octagonal, flat, dome and lotus (three leaves)
Grades you can request Platinum (ash 1.6–1.9%), Super Premium (ash 1.9–2.3%) and Premium (ash 2.3–2.5%)
Batch reference and COA Every sample ships with its batch certificate of analysis (COA)

The ash band beside each grade is the value to test against. Keep the batch reference with every result, so a later container can be checked against the same grade.

2. Courier, cost and timeline

The briquettes are free and the buyer pays the courier; the dispatch date follows once the address is complete.

Important

Who pays what

Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS). Ask for the courier fee to your address before the parcel is booked, so the cost is known before it ships.

Give the courier a complete address, so the parcel clears without a call back to you:

  • the company name and full street address with postal code;
  • a phone number the courier can call on arrival;
  • the importer's tax or customs number, where your country's customs asks for one on courier imports.

Couriers carry charcoal under their own rules for the product, so acceptance and transit time can differ by destination. A sample's own test results never change how a container ships: Under Amendment 42-24, a UN N.4 self-heating test result (UN Manual of Tests and Criteria, section 33.4.6) can no longer be used to take UN 1361 charcoal out of the IMDG Code. Untested material is assigned at least packing group III. How regulatory statements and facts on this page are sourced and dated is set out in the editorial and review policy.

3. Who can request a sample

Samples go to buyers planning at least one container for resale, in a market the factory serves.

  1. At least one container. The minimum order is 1 ocean container, in 20 ft and 40 ft sizes.
  2. For resale. The factory sells wholesale only, to importers, distributors and brand owners, not to lounges, shops or consumers.
  3. A served market. The factory ships to the markets listed on the markets page; ask the export desk about any other destination.

The same three questions open the products hub, beside the formats a sample can cover.

4. Five checks to run on the sample

Five checks on one fixed setup show whether the sample matches the grade you asked for.

  1. Step 1

    Weigh and count

    Pieces per kilogram. Weigh out 1 kg and count the pieces, then compare the count with the nominal count for that shape and size. Counts are nominal at packing and move a little with moisture.

    Pieces per kg for each shape and size

  2. Step 2

    Measure ten pieces

    Every side, with calipers. Measure ten pieces on each side with a digital caliper and compare every side with the nominal size; the tolerance is ±0.3 mm per side.

  3. Step 3

    Burn one piece to ash

    Color and residue. Burn one piece completely on a fixed setup and look at the color of the ash and how much is left. Ash content itself is a laboratory value: compare a lab result with the grade's ash band, not with the color.

  4. Step 4

    Light and time it

    In your own device. Light pieces in the device and bowl your buyers use, with the airflow fixed, and note the time to a full glow and the burn time. Compare times only within the same setup.

  5. Step 5

    Note the smell

    At light-up and steady burn. Note any smell at ignition and again once the pieces burn steadily, and record both on the same sheet as the other four checks.

A digital caliper reads to 0.01 mm; the size tolerance of a briquette is stated per side against its nominal dimension.

Note

Burn time depends on the device, the bowl and the airflow as much as on the briquette, so a time measured on one setup cannot be compared with a time from another. Fix the setup first, then compare samples on it.

The test protocol for your sample sets out each check with its tools and its record sheet. How to read the batch COA beside your results is set out in how to read our COA.

5. How the sample maps to the container

A sample proves the batch it came from; your container is a later batch, so agree before the deposit how the approved sample will be used to check it.

Golden sample: the approved sample is kept so reorders can be matched to the previous order.

Retained samples: a sample of every batch, about 25 kg of each batch, kept for 5 years.

Sealing and labelling an approved sample with the buyer, the batch and the date is what lets a later container be checked against the same reference.

The general method is set out in how the approved sample is held from sample to container. A buyer replacing another supplier can start from its current certificate: the sample is matched from the buyer's current COA: a matching sample ships within 3 days, then the buyer orders the first container, as described on the switching and second-source page.

6. Request your sample

Send the request with the details the export desk needs to pack the right parcel and quote the courier.

  • your name and company;
  • the country and the port of discharge for the container you plan;
  • the shapes and grades to sample;
  • the container you plan, 20 ft or 40 ft, and how often;
  • a phone number with WhatsApp.

The form at the end of this page takes these details, and the contact page lists WhatsApp and email if you prefer to send them there. Requests are answered by the Export Sales Manager, Irfan Maulana, within 15 minutes during working hours (WIB), or the next working day outside them.

Questions buyers ask

Is the sample free?
Yes, the briquettes are. Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS). Ask the export desk for the courier cost to your address before the parcel is booked.
Can I get samples of more than one grade or shape?
Yes. Several shapes and grades can travel in one parcel within the free allowance; ask for each combination to be labelled with its batch reference, so your test results stay attributable. A larger quantity is not a sample: the smallest order is 1 ocean container.
Does the sample come from the same production as my container will?
No sample can. It is drawn from a current production batch, and your container will be a later batch. Keep the sample's batch reference and its COA, and agree before the deposit how the approved sample will be used to check the first container. A sample is a reference, not a promise that every value will be identical.
How long until the sample arrives?
The export desk confirms the dispatch date once your address is complete, and the courier's transit time to your country follows from there. Couriers carry charcoal under their own rules for the product, so acceptance and transit time can differ by destination; keep the tracking number with your request.

Sources

  1. Resolution MSC.556(108): Amendments to the IMDG Code, special provision 978.2 and 978.3 (opens in new tab), International Maritime Organization (IMO) — accessed

Request your sample

Tell us the shapes and grades to test and where to send them.

Volume