Quick answer
Which shapes and sizes of shisha charcoal does this factory make, and how much of each fits in a container?
Eight shapes are on file: cubes of 25 to 28 mm have stated counts and loads; hexagonal, finger and octagonal sizes are made to order. A 20 ft container of shisha charcoal holds 18.5–20 t net by shape, and a 40 ft 26.5 t. The stated size tolerance is ±0.3 mm per side. Counts are nominal; measured counts and deviations are published once confirmed.
Shapes and sizes at a glance
As confirmed, November 2026
- Shapes on file
- 8: cube, cube with hole, hexagonal, finger (stick), octagonal, flat, dome and lotus (three leaves)
- Cube sizes
- 22 mm, 25 mm, 26 mm, 27 mm and 28 mm
- Nominal pieces per kg, cubes of 25, 26, 27 and 28 mm
- 72, 64, 54 and 48
- Net load per 20 ft container, by shape
- 18.5–20 t
- Net load per 40 ft container
- 26.5 t
- Size tolerance
- ±0.3 mm per side
- Sizes made to order
- hexagonal, finger (stick) and octagonal
1. What a briquette shape is
The shape and the size of a briquette are set by the mold it is extruded through.
Definition
briquette shape
A briquette shape is the form a coconut shell charcoal briquette is extruded and cut into, such as a cube, a flat or a hexagonal piece; together with its size it fixes the pieces per kilogram and the weight a container carries.
At this factory forming is extrusion only, with single laser-cut molds, so each shape and size has its own mold. The station is on the pressing and cutting page, under briquette pressing.
How facts on this page are confirmed is set out in the editorial and review policy.
2. The shapes and their sizes
Eight shapes are on file, and each row of the table is one line the factory makes.
| Shape | Sizes | Nominal pieces per kg | Data sheet |
|---|---|---|---|
| Cube | 22 mm | 96 | This page |
| Cube | 25 mm | 72 | Cube 25 mm |
| Cube | 26 mm | 64 | Cube 26 mm |
| Cube | 27 mm | 54 | Cube 27 mm |
| Cube | 28 mm | 48 | Cube 28 mm |
| Cube with hole | 26, 30 mm | Not stated | This page |
| Hexagonal | Made to order, for example 20×50, 21×50, 22×45, 23×40 or 24×50 mm, and other combinations of those dimensions | Not stated | Hexagonal |
| Finger (stick) | Made to order; sizes on request | Not stated | This page |
| Octagonal | Made to order; sizes on request | Not stated | This page |
| Flat | 25×25×15, 25×25×17 mm | Not stated | Flat 25×25×15 mm |
| Dome | 20×35 mm | Not stated | This page |
| Lotus (three leaves) | 15×25 mm | 72 | This page |
A count that reads "Not stated" is not on file, and none is worked out here. Measured counts will be published on the pieces per kg page.
3. Container loads by shape
The load of a 20 ft container depends on the shape; a 40 ft container holds the same weight of every shape that has a load on file.
| Shape and size | Net load per 20 ft | Net load per 40 ft |
|---|---|---|
| Cube, 22 mm | Not stated | Not stated |
| Cube, 25 mm | 20 t | 26.5 t |
| Cube, 26 mm | 20 t | 26.5 t |
| Cube, 27 mm | 19.5 t | 26.5 t |
| Cube, 28 mm | 19.5 t | 26.5 t |
| Cube with hole, 26, 30 mm | Not stated | Not stated |
| Hexagonal, made to order | 18.5 t | 26.5 t |
| Finger (stick), made to order | 18.5 t | 26.5 t |
| Octagonal, made to order | 18.5 t | 26.5 t |
| Flat, 25×25×15, 25×25×17 mm | 18.5 t | 26.5 t |
| Dome, 20×35 mm | Not stated | Not stated |
| Lotus (three leaves), 15×25 mm | Not stated | Not stated |
On pallets the figure falls: a palletized 20 ft container holds 16 t net, on ISPM 15 pallets.
The cost examples page shows what one container of each shape weighs and costs, line by line, under container cost. The two containers are compared on the 20 ft or 40 ft page, under container size, and the cartons behind the loads are on the packaging page, under export packaging.
4. Made to order, and custom shapes
Some shapes have no fixed size list, and a shape that is not on the list needs a mold of its own.
- Hexagonal: made to order, for example 20×50, 21×50, 22×45, 23×40 or 24×50 mm, and other combinations of those dimensions.
- Finger (stick): made to order; sizes on request.
- Octagonal: made to order; sizes on request.
A shape that is not on the list is a custom shape, and its mold costs USD 300–500, paid by the buyer. The conditions are on the custom shapes page.
Note
Not on file yet
- Whether a made-to-order size needs a new mold, and who pays for it.
- The minimum run for a custom mold.
- The lead time for a new mold.
5. Size tolerance and how to check it
One tolerance is stated for every shape, size and grade.
The size tolerance is ±0.3 mm per side. That is the tolerance the factory states, not a measured result.
The size page explains how to check cube size on arrival with a caliper. Its log of measured deviations shows rows once the first are confirmed.
6. Choosing a shape
A few things are on file to choose a shape by, and a sample settles the rest.
- What your market commonly runs. The market norms as of November 2026 are on the formats by market page, under market format.
- Where each cube size is commonly run, as the owner states it. This is a statement about the market, not a list of this factory's customers.
- Cube 25 mm: Russia, Eastern Europe and Kazakhstan; used with heat-management devices (HMD)
- Cube 26 mm: Russia, Eastern Europe and Kazakhstan; used with heat-management devices (HMD)
- Cube 27 mm: Europe and the USA; longer sessions
- Cube 28 mm: Europe
- The load. The table in section 3 gives the tons per container for each shape.
- The minimum per line. A mixed container is accepted, with at least 2 t for each shape, size and design; the lines can be in different grades or the same grade, and two grades of one shape, size and design do not share one minimum; no surcharge applies.
No burn time or heat figure is stated per shape on this site. Test the shape yourself: a shisha charcoal sample is on the samples page.