Skip to content
PT SCBI

Data sheet · Products

Shisha Charcoal Grades and Specifications: The Ash Range Behind Each Grade Name

This page belongs to the products section and is written for a buyer choosing or comparing a grade of shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers. It gives the grades this factory makes and the ash range that sets each one. It also says what is not stated per grade, and what no grade promises.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
5 min read

Quick answer

What do the shisha charcoal grade names mean, and what does each grade guarantee?

A grade is a specification band, not a standard shared between factories; this factory's three grades are each set by an ash range. The three are Platinum, Super Premium and Premium, from 1.6–1.9% ash for Platinum to 2.3–2.5% for Premium. No moisture, fixed carbon or volatile matter limit is stated per grade of coconut shell charcoal briquettes; the ranges are read as received (wet basis).

The grades at a glance

As confirmed, November 2026

Platinum: ash content
1.6–1.9%
Super Premium: ash content
1.9–2.3%
Premium: ash content
2.3–2.5%
Size tolerance, all grades
±0.3 mm per side
Binder
Tapioca starch, typically 1.5–3% of the mix
Shapes
Cube, Cube with hole, Hexagonal, Finger (stick), Octagonal, Flat, Dome and Lotus (three leaves)

1. A grade is a specification band, not a standard

A grade name is a label a factory gives to a range it sets itself.

Definition

shisha charcoal grade

A shisha charcoal grade is a trade name for a specification band — limits on ash, moisture, fixed carbon, volatile matter and calorific value measured by stated test methods — not a standard shared between factories.

The grade names of this trade are not defined by a common standard, so one name can sit on different limits at two factories. What can be compared is the limit behind the name, measured by the same method and on the same basis. How the method and the basis appear on this factory's report is shown in how to read our COA.

How facts on this page are confirmed is set out in the editorial and review policy.

2. Our grade ranges

One parameter separates the grades at this factory: ash content.

Ash content range of each grade of coconut shell charcoal briquettes at this factory, as stated by the owner in November 2026; the certificates on file are issued by Carsurin Tbk (Semarang laboratory, Central Java), and each range is read on the figure as received (wet basis).
GradeAsh content
Platinum 1.6–1.9%
Super Premium 1.9–2.3%
Premium 2.3–2.5%

All grades share one stated size tolerance: ±0.3 mm per side. The grades are made in the shapes on the shapes and sizes page.

Note

Not stated per grade

  • Limits for moisture, fixed carbon, volatile matter and calorific value.

Each grade has a page of its own: Platinum, Super Premium and Premium. What each parameter measures, and by which method, is set out on the quality parameters page.

3. How the ranges are checked

A range is the limit a batch is held to, and the measured value of a batch belongs in a register.

Measured values are published in the batch COA register: see the last batches' measured ash and moisture. Its confirmed rows are listed there.

What a buyer can hold today is the sample: every sample ships with its batch certificate of analysis (COA). How an approved sample is carried into an order is on the sample-to-container page.

4. What a grade does not guarantee

A grade fixes an ash range and nothing else.

Caution

A grade is not a promise about

  • Burn time and heat. They depend on the piece size, the bowl, the heat-management device and the airflow.
  • Every batch being the same. A certificate of analysis describes one batch.
  • Ash color, smell and breakage. These are observations from a sample test, not grade limits.

The binder on file is tapioca starch, typically 1.5–3% of the mix. It is stated once for the product, not per grade.

Test those points yourself with the sample test protocol.

5. Map your current supplier's grade to ours

Your current grade maps to one of these by its ash figure, not by its name.

  1. Step 1

    Read your current COA

    The ash figure first. Take the ash content from your current supplier's certificate of analysis, and note the test method and whether the figure is on a wet or a dry basis.

  2. Step 2

    Put both figures on one basis

    Ask the laboratory. If the method or the basis differs, ask the laboratory that issued your COA for the equivalent. That conversion is the laboratory's to make.

  3. Step 3

    Find the range that contains it

    Then sample it. Pick the grade whose ash range contains your figure, and ask for a sample of that grade and of the one above it.

For a buyer who is switching, the factory's route is a sample matched from the buyer's current COA: a matching sample ships within 3 days, then the buyer orders the first container. That path is on the switching and second source page.

A shisha charcoal sample settles the choice: test the grade on a sample before you order. The terms are short: Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS).

Questions buyers ask

Is a Platinum grade the same at every factory?
No. Grade names such as Platinum, Super Premium and Premium are trade names without a common standard, and each factory sets its own limits. Compare the limit behind the name, measured by the same method on the same basis. At this factory the limit behind each name is an ash range, listed in section 2.
Which number matters most when comparing grades?
At this factory, ash content: it is the one parameter that separates one grade from the next. Moisture, fixed carbon and volatile matter limits are not stated per grade here. When you compare with another supplier, check that both ash figures are on the same basis, wet or dry, and by the same method. This factory's ranges are read on the figure as received (wet basis). A batch exactly on the line between two ranges is sold as the lower grade.
Does a higher grade burn longer?
Not by itself. Burn time depends on the piece size, the bowl, the heat-management device and the airflow at least as much as on the grade. Compare grades on your own device with the sample test protocol, not on a minutes figure from a spec sheet.
Can I order a specification between two grades?
Ask the export desk. The three ranges in section 2 are the grades on file, and no other specification is published. A limit of your own, once agreed, is written into the specification on the proforma invoice.

Ready to specify your container?

Send shape, grade, packaging and destination port — we confirm availability and lead time.