Skip to content
PT SCBI

Guide · Products

Private Label Shisha Charcoal: From Brief to First Branded Container

This guide belongs to the products section and is written for a distributor or brand owner who wants shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, under an own brand, by the container. It sets out the steps, the minimums and the time the boxes take. The charcoal is the same; the box is yours, and the box has its own clock.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
6 min read
Shisha charcoal is packed in inner boxes inside corrugated master cartons, which are then stacked or palletized for the container.

Quick answer

How do I get my own brand onto these briquettes, and what happens between the brief and the first container?

Private label prints the buyer's design on inner boxes and master cartons from 2 t per design; a new design prints in 2 weeks. A repeat design prints in about 2 weeks. The factory supplies the dieline, the buyer supplies vector artwork, and the plate cost is included in the price list. The order is one full container of coconut shell charcoal briquettes, which can carry several designs.

1. What private label means here

Private label here means the factory's briquettes in boxes and cartons printed with the buyer's own design.

Definition

private label

Private label, for coconut shell charcoal briquettes, is an order in which the factory packs its briquettes in inner boxes and master cartons printed with the buyer's own brand and design.

In practice that is the buyer's design printed on inner boxes and master cartons. The inner box is duplex 250 gsm over E-flute, CMYK offset print, varnish finish; the master carton is kraft K150/M125K150, single-wall B-flute, up to 3 colors.

The factory has produced shisha charcoal for 18 buyers' brands. Their names are not published, and yours would not be either.

2. From brief to first branded container

A branded order runs through eight steps, and the box needs the buyer three times: for the brief, the artwork and the proof.

  1. Step 1

    Brief

    Say what you want made. Name the shape, size, grade, inner unit, master carton and destination market. The request for quotation carries the same fields.

    Send the brief

  2. Step 2

    Sample and approval

    The reference comes first. Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS). Once you approve it, the approved sample is kept so reorders can be matched to the previous order.

    How to request a sample

  3. Step 3

    Dieline

    The template for your pack. The dielines are supplied by the factory, one for each printed pack of the format you chose.

    The dieline and the artwork files to send

  4. Step 4

    Artwork

    Your files, on that dieline. Send vector files (Illustrator preferred), CMYK plus Pantone, placed on the factory's dieline, with room for the text the box must carry in your market.

  5. Step 5

    Proof

    Approve before print. You approve a proof before anything is printed. The print lead time counts from that approval, not from the first draft.

    How the proof is approved

  6. Step 6

    Printing 2 weeks

    From approved artwork. A new design takes 2 weeks from approved artwork to printed boxes in the factory; an existing design takes about 2 weeks.

  7. Step 7

    Production and weathering

    The charcoal itself. Production takes 21 days for a 20 ft container and 21–25 days for a 40 ft, followed by 14 days of weathering before packing.

  8. Step 8

    Packing and loading

    Your boxes, your container. The briquettes are packed in your printed boxes and cartons and the container is loaded; from packing to on board the factory plans 14 days. The proforma invoice names every variant in the container.

    Payment terms and the proforma invoice

Note

Durations are per step

The durations above are not added up on this page. Whether printing runs alongside production or before it is confirmed for your order, and the lead time of each stage is logged on the lead-times page.

The reference kept from step 2 is the golden sample, and the files for steps 3 and 4 are specified on the page about the dieline.

3. Minimums and formats

The minimum applies to each design, not to the order as a whole, and that is the number that shapes a range.

The minimums that apply to a private-label order of coconut shell charcoal briquettes, as confirmed by the factory in November 2026.
RuleAs confirmed by the factory
Minimum per design 2 t per shape, size and packaging variant
Minimum order 1 ocean container
Mixed containers Accepted, with at least 2 t for each shape, size and design; the lines can be in different grades or the same grade, and two grades of one shape, size and design do not share one minimum; no surcharge applies
A private-label design is printed for one inner-box format at a time, so each box size of shisha charcoal needs its own dieline and artwork.

As arithmetic on those facts: a 20 ft load of 20,000 kg of 25 mm cubes could be split into up to 10 variants of 2 t. A real range is usually far smaller, and a small line can be tested as a shisha charcoal sample first.

The boxes and cartons a design is printed on are specified on the packaging page: the formats your design is printed on, under export packaging. A buyer weighing a plain box first can read plain boxes or your own design; the minimum order is the same either way.

4. How long printing takes

Printing is counted from approved artwork, so the date you approve is the date that matters.

Print lead time for private-label boxes of coconut shell charcoal briquettes, from approved artwork to printed boxes in the factory, as confirmed by the factory in November 2026.
DesignPrint lead time
A new design 2 weeks
An existing design about 2 weeks

The clock starts at your approval of the proof, not at the first draft you send. Artwork that comes back for changes has not started it.

The order timeline shows where box printing sits inside the order timeline. No total from deposit to loading is computed here.

5. What branding costs

Branding has no setup fee of its own at this factory.

The plate cost is included in the price list, and the binding price for an order is the one on its proforma invoice. The arithmetic is on the cost page: what branding adds per box and per container, where private-label cost is defined.

A buyer planning a first own-brand order can work through budgeting the first branded container.

6. Reorders on the same design

A reorder on the same design is faster, because the artwork steps are already done.

An existing design prints in about 2 weeks. For the charcoal, the approved sample is kept so reorders can be matched to the previous order.

A sealed reference sample from the approved batch lets a repeat order of private-label shisha charcoal be checked against the first one.

The printing plates are kept for the buyer's next order, at no charge, and leftover printed boxes are stored for the buyer's next order. What carries over, and what turns a reorder into a new variant, is on the page about how the approved design is locked for reorders.

How facts on this page are confirmed is set out in the editorial and review policy.

Questions buyers ask

What is the minimum order for a private-label design?
Each design must cover at least 2 t of one shape, size and packaging variant, and the order as a whole is one full container. A container can carry more than one design or shape when each reaches 2 t. The proforma invoice lists every variant with its quantity, so the split is fixed before the deposit.
How long does it take to print the boxes?
A new design takes 2 weeks and a repeat of an existing design about 2 weeks, counted from approved artwork to printed boxes at the factory. The clock starts at your approval of the artwork, not at the first draft. Where printing sits against production and weathering is shown on the lead-times page.
How many private-label brands has the factory produced?
Eighteen brands, as counted by the factory. The names are not published, because a private-label buyer's supplier is that buyer's business information, and the same applies to your brand. Customer references are available to serious buyers on request, and the verification page lists the registrations and records you can check yourself.

Lock your packaging across reorders

Send your artwork brief — we reply with dieline, print lead time and first-container date.