Quick answer
What artwork does the factory need, and how do I prepare it so it is accepted the first time?
The factory supplies the dieline; the buyer returns vector artwork in CMYK plus Pantone, placed on that dieline, before printing starts. The inner box is printed in CMYK on varnished duplex board; the master carton is printed on kraft in up to three colors. The dieline is drawn for one cube size and one inner unit of coconut shell charcoal briquettes, so request it once the format is fixed.
1. What a dieline is
A dieline is the template the artwork is placed on, and it belongs to one pack of one format.
Definition
dieline
A dieline is the flat, to-scale outline of a box or carton that shows its cut lines, fold lines and glue areas, on which the artwork is placed before printing.
Box dimensions change with the cube size and the inner unit, so the dieline for a 1 kg box of 25 mm cubes does not fit a 1 kg box of 28 mm cubes. The dimensions on file are on the inner boxes page.
The dielines are supplied by the factory, and they are issued once the shape, the size and the inner unit are fixed.
2. What the factory supplies and what you supply
The factory supplies the template and the buyer supplies everything that goes on it.
| Item | Supplied by | Detail |
|---|---|---|
| The dieline for each printed pack | The factory | Supplied by the factory |
| The artwork files | The buyer | Vector files (Illustrator preferred), CMYK plus Pantone |
| The color specification | The buyer | CMYK values, with any Pantone spot color named |
| The text for the box | The buyer | Written against the label requirements of the destination |
The order of these steps inside a branded order is on the private-label page.
3. Two print surfaces: inner box and master carton
A design is printed on two surfaces with different limits: the inner box takes full color, the master carton does not.
| Pack | Board and print |
|---|---|
| Inner box | Duplex 250 gsm over E-flute, CMYK offset print, varnish finish |
| Master carton | Kraft K150/M125K150, single-wall B-flute, up to 3 colors |
For the design this means two versions: the full artwork on the inner box, and a simpler one, planned in up to three colors on kraft, on the master carton. The carton dimensions are on the master cartons page.
4. Checks before you send the files
Four checks have an answer on file; five more are questions to send with the dieline request.
- The files are on the factory's dieline for this shape, size and inner unit, not on another supplier's template.
- The files are vector files, with Adobe Illustrator preferred.
- The colors are CMYK, with every Pantone spot color named.
- The master carton version uses no more than three colors.
Note
Ask for these with the dieline
These values depend on the printer and the pack, and none is published here. The export desk sends them with the dieline:
- the bleed beyond the cut line;
- the safe margin inside the folds;
- the image resolution for photographs;
- where the barcode goes, and at what size;
- the areas that take no ink, such as glue flaps.
5. Text the box must carry
The design has to leave room for the text a box must carry, and that text depends on where the box is sold.
Which text that is, and in which language, is set out on the labeling page: the text every box must carry. This page states no label rule for any market.
6. From artwork to proof
After the files are sent, the buyer approves a proof, and the print lead time counts from that approval.
Printing takes 2 weeks for a new design and about 2 weeks for an existing one. The proof step is on the page about how the proof is approved and the print checked, and the lead time of the whole order is logged separately.
The boxes themselves are part of the export packaging of the order. How facts on this page are confirmed is set out in the editorial and review policy.