Skip to content
PT SCBI

Guide · Shapes and sizes

Custom Shapes and Sizes of Shisha Charcoal: What Is Made to Order, the Mold and the Minimum

This guide belongs to the shapes and sizes page and sets out the terms for a briquette shape or size of shisha charcoal that is not on the standard list. It is written for a brand owner or importer of hookah charcoal, the hookah coals of US and Canadian buyers, who wants a format of their own. A custom shape can be made, and it needs a mold the buyer pays for.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
5 min read
Each briquette shape is formed through its own mold; a shape that is not on the list has no mold yet.

Quick answer

Can this factory make a shape or size that is not on its list, and what does it take?

A shape not on the list can be made to order; its mold costs USD 300–500 and is paid by the buyer. Three shapes of shisha charcoal are already made to order here: hexagonal, finger (stick) and octagonal. The minimum on file is 2 t per shape, size and packaging variant, inside a one-container order. A new mold gives its first pieces 14 days after the drawing is approved.

1. What a custom format is

A custom format is any shape or size that is not on the factory's standard list, and the factory can make one to order.

Definition

custom briquette format

A custom briquette format is a shape or size of coconut shell charcoal briquette that is not on a factory's standard list and is made to order from the buyer's dimensions; a new shape needs a mold of its own.

This page keeps three cases apart:

  • On the standard list. Ordered as it stands, with its count, box and load on file: the standard formats before you consider a custom one.
  • Already made to order. Hexagonal, finger (stick) and octagonal: the shape exists, and its size is agreed for each order.
  • Not on the list. A new shape, which needs a mold of its own.

2. Shapes already made to order

Three shapes are already made to order, so asking for one of them is not a request for a new shape.

The shapes of coconut shell charcoal briquettes this factory makes to order: the sizes on file for each and the net load per container in metric tons, as stated by the owner in November 2026.
ShapeSizes on fileNet load per 20 ftNet load per 40 ft
Hexagonal Made to order, for example 20×50, 21×50, 22×45, 23×40 or 24×50 mm, and other combinations of those dimensions18.5 t26.5 t
Finger (stick) Made to order; sizes on request18.5 t26.5 t
Octagonal Made to order; sizes on request18.5 t26.5 t

The hexagonal examples are the owner's own; each is the width across the flats × length. The shape has its own page, under hexagonal briquette: hexagonal briquettes.

Some briquette shapes are made to order: the shape is on the list, and its size is agreed for each order.

3. The mold: what it costs and who pays

A shape that is not on the list needs a new mold, and the buyer pays for it.

Forming at this factory is extrusion only, with single laser-cut molds, the step described under briquette pressing. A shape that is not on the list has no mold yet.

The mold costs USD 300–500, paid by the buyer. It is quoted as its own item, outside the price list: what is quoted and not listed.

Note

Not on file

  • The days from an approved drawing to the first pieces from the mold.
  • Who keeps the mold, and whether it is used only for the buyer who paid for it.
  • Whether a made-to-order size of an existing shape needs a new mold.
  • The smallest and the largest piece the line can form.

4. Minimums and packaging for a custom format

A custom format falls under the same minimums as any other variant, and its packaging has to be drawn for it.

  • Per variant. 2 t per shape, size and packaging variant. A mixed container is accepted, with at least 2 t for each shape, size and design; the lines can be in different grades or the same grade, and two grades of one shape, size and design do not share one minimum; no surcharge applies.
  • Per order. The minimum order is 1 ocean container.
  • With a new mold. A shape that needs a new mold has the usual 2 t per variant.
Box and carton dimensions are set per briquette size, so a new size gets a box and a carton of its own.

Box and carton dimensions are on file per size, so a new size has none yet. Its box and carton get their own dieline; dielines are supplied by the factory.

The size tolerance on file for all grades is ±0.3 mm per side; ask for the tolerance of your format to be written with its dimensions. No load per container is stated for a shape that has not been made.

5. What to send with a request

A request for a custom format needs a drawing, because a quote is only as exact as the dimensions it is given.

  • A drawing with every dimension in millimeters.
  • The count per kilogram you are aiming for, if you have one.
  • The grade.
  • The inner unit and the master carton.
  • The quantity of each variant.
  • The destination port.

The agreed format is then written on the proforma invoice, which states the full specification, the packaging and the volume. Send the drawing with a request for quotation.

6. Sample a standard format first

Test a standard format before you commit to a custom one.

A standard format has a nominal count, a box, a carton and a container load on file. A custom format starts with none of them.

The sample terms on file cover the formats the factory already makes. Free samples of 1–10 kg; the buyer pays the courier (DHL or EMS). Start there, with a shisha charcoal sample: sample a standard format first.

Tip

Send your drawing together with the sample request, and ask the export desk which standard format is closest to it.

How facts on this page are confirmed is set out in the editorial and review policy.

Questions buyers ask

Who pays for the mold of a custom shape, and how much is it?
For a shape that is not on the product list, the mold costs USD 300–500, paid by the buyer. The factory keeps the mold and uses it only for the buyer who paid for it.
What is the smallest order for a custom shape or size?
The minimum on file for every variant is 2 t per shape, size and packaging variant, and the smallest order overall is 1 container. A shape that needs a new mold has the usual 2 t per variant.
Can I get a sample of a custom shape before I order?
The sample terms on file cover the formats the factory already makes: free samples of 1–10 kg; the buyer pays the courier (DHL or EMS). For a new shape, a trial piece from the new mold is always sent for approval before production.

Ready to specify your container?

Send shape, grade, packaging and destination port — we confirm availability and lead time.