Quick answer
How are the briquettes formed, and how is their size held?
Briquettes are formed by extrusion only, through single laser-cut molds, to a stated size tolerance of ±0.3 mm per side. A batch of coconut shell charcoal briquettes fails on cracks or breakage and on inconsistent size or density. Measured deviations go to the size log, which shows rows once the first are confirmed. How the strand is cut and how often pieces are measured is not on file.
1. What briquette pressing is
Pressing is the trade's general name for the forming step; at this factory the step is extrusion.
Definition
briquette pressing
Briquette pressing is the forming step that compresses the charcoal and binder mix into its shape; in an extrusion line the mix is forced through a mold and the strand is cut into pieces of the nominal size.
Forming here is extrusion only, with single laser-cut molds. The mix arrives from the previous station, described under binder mixing, and leaves as cut pieces of one shape and size.
How facts on this page are confirmed is set out in the editorial and review policy.
2. Extrusion and the laser-cut mold
One mold makes one shape and size, and the mold is laser-cut.
The shapes on file are cube, cube with hole, hexagonal, finger (stick), octagonal, flat, dome and lotus (three leaves); the sizes of each are on the products page.
A shape that is not on that list needs its own mold: a custom mold costs USD 300–500, paid by the buyer. The conditions are on the page about custom shapes and sizes.
The extruder model, its pressure and its speed are not on file, so they are not stated.
3. How size is held at this station
Size is held to a stated tolerance, and a batch that misses it fails.
The size tolerance is ±0.3 mm per side. That is the tolerance the factory states, not a measured result.
- Cracks or breakage fails a batch.
- Inconsistent size or density fails a batch.
Note
Not on file yet
How the strand is cut, how often pieces are measured at the extruder and with which tool are not on file yet, so this page does not describe them.
4. The record this station feeds
What this station produces is measured in the size log.
The size log is the caliper log this station feeds: it records the batch, the shape, the nominal and the measured size, and the deviation. The first rows are being collected, and they appear on that page once they are confirmed.
Breakage is recorded separately, on the drop-strength page. The formed pieces go on to the ovens: the next station is drying.