Skip to content
PT SCBI

Guide · Production process

Shell Charcoal Sourcing: Where the Raw Material Comes From and the Incoming Checks

This guide is station 1 of 7 in briquette production at the factory, and is written for a buyer asking what goes into shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, and how it is controlled. It covers where the shell charcoal comes from and the checks it passes on arrival. The material is bought carbonized and checked before it is milled.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
4 min read
Coconut shell charcoal is the carbonized shell of the coconut, a by-product of the copra and desiccated-coconut industries.

Quick answer

Where does this factory's shell charcoal come from, and how is it checked on arrival?

Shell charcoal is bought ready carbonized from Indonesian carbonizers and checked on arrival for moisture, fixed carbon, volatile matter, ash content and ash color. The carbonizers are in Sulawesi, East Nusa Tenggara (NTT) and Sumatra. Intake limits are moisture below 12%, fixed carbon 82% or more and volatile matter 14% or less. These limits describe the raw material, not the finished coconut shell charcoal briquettes.

1. What shell charcoal sourcing is

Sourcing here means buying shell charcoal that is already carbonized, and checking it before it enters the line.

Definition

shell charcoal sourcing

Shell charcoal sourcing is the purchase of carbonized coconut shell charcoal from carbonizers as the raw material for briquettes, together with the checks a factory runs on incoming shell charcoal before it is milled.

The raw material is coconut shell charcoal, bought as carbonized shell charcoal from carbonizers. Carbonizing happens at the carbonizers, not on this site; who does what along the chain is set out under the Indonesian coconut briquette supply chain.

How facts on this page are confirmed is set out in the editorial and review policy.

2. Where the shell charcoal comes from

The shell charcoal comes from carbonizers in three regions of Indonesia.

  • Sulawesi
  • East Nusa Tenggara (NTT)
  • Sumatra

The suppliers are not named, and the share bought from each region is not on file. What each region grows and carbonizes is described on the page about the regions the shells come from.

3. The incoming checks and their limits

Every delivery is checked for five things, and three of them carry a stated limit.

Checks this factory runs on incoming carbonized coconut shell charcoal, with the limit on file for each; confirmed by the owner, November 2026.
CheckLimit on file
Moisture Below 12%
Fixed carbon 82% or more
Volatile matter 14% or less
Ash content Checked; no limit on file
Ash color Checked; no limit on file
Ash is what remains when charcoal is burned completely, so the ash content and ash color of shell charcoal are read from a burned sample.

Note

These are raw-material limits

The limits apply to the shell charcoal on arrival. The finished briquette is specified by its grade, on the grades and specifications page, and its measured values belong in the batch COA register.

4. What is on file about origin

Two things are on file about where the raw material comes from, and both are available to a buyer.

  • A statement letter on raw-material origin
  • Photos and videos with location on request

Questions about sourcing claims are answered on the sustainability and sourcing claims page; this page makes none.

5. From intake to the mill

Shell charcoal that passes intake goes straight to the mills.

The next station grinds and cleans it: 4 hammer mills, then a 10 m rotary sieve in 5 cleaning passes. That step is on the milling and mixing page, and the whole line on the production process page.

Note

Not on file yet

  • A check for foreign matter, such as sand or stones.
  • What happens to shell charcoal that fails a check.
  • How often each check is run.

Questions buyers ask

Which limits must incoming shell charcoal meet?
Incoming shell charcoal is checked for five things: moisture below 12%, fixed carbon of 82% or more, volatile matter of 14% or less, ash content and ash color. The first three carry a stated limit. For ash content and ash color the factory names the check, and no numeric limit is on file.
Does the shell charcoal come from one region?
No. The factory buys carbonized shell charcoal from carbonizers in three regions of Indonesia: Sulawesi, East Nusa Tenggara (NTT) and Sumatra. The share bought from each region is not on file. The factory provides a statement letter on raw-material origin, and photos and videos with location on request.
Why are the intake limits different from the finished briquette's specification?
Because they apply to different materials. The intake limits describe the carbonized shell charcoal as it arrives, before milling, binder and drying. The finished briquette is specified by its grade, and its measured values belong in the batch COA register. Moisture is the clearest case: below 12% at intake, 2% at most after the drying ovens.

See the factory for yourself

Video audit on request; third-party inspection by the agency of your choice.