Skip to content
PT SCBI

Overview · Factory

How Coconut Shell Charcoal Briquettes Are Made Here: The Production Process, Station by Station

This page describes how the factory works, and is written for a buyer checking how shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, is made and controlled here. It walks the line in order. There are seven stations, and each one states what is confirmed and where its results go.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
5 min read
Charcoal briquettes are formed by pressing milled charcoal with a binder and drying the pressed pieces before packing.

Quick answer

How are coconut shell charcoal briquettes made at this factory, station by station?

Bought shell charcoal passes seven stations here: intake checks, milling and mixing, extrusion, oven drying, weathering, quality checks, then hand-checked packing and loading. The shell charcoal is bought from carbonizers and checked on arrival; coconut shell charcoal briquettes are then formed by extrusion, dried in electric ovens and weathered before packing. Each station page states what the owner has confirmed and names the record its results go to.

In this section

  1. Shell Charcoal Sourcing: Where the Raw Material Comes From and the Incoming Checks

    Shell charcoal is bought ready carbonized from Indonesian carbonizers and checked on arrival for moisture, fixed carbon, volatile matter, ash content and ash color.

  2. Milling, Sieving and Binder Mixing: How the Charcoal Is Prepared for Extrusion

    Shell charcoal is ground in hammer mills, cleaned in a rotary sieve, then mixed with a tapioca starch binder before extrusion.

  3. Pressing and Cutting: Extrusion Through Laser-Cut Molds and How Size Is Held

    Briquettes are formed by extrusion only, through single laser-cut molds, to a stated size tolerance of ±0.3 mm per side.

  4. Drying Coconut Shell Charcoal Briquettes: The Oven Cycle and the Moisture Gate

    Briquettes dry in electric ovens on a slow cycle of 48 hours or more, to a moisture content of 2% at most.

  5. The Weathering Yard: 14 Days Under Cover Between the Ovens and the Packing Line

    Briquettes spend 14 days under cover in the open air after production and before packing; the production and packing dates are recorded for every container.

  6. Quality Checkpoints in Production: The In-Line Checks and What Fails a Batch

    A batch fails for smell or smoke on warming up, high ash, cracks or breakage, or inconsistent size or density.

  7. Packing and Loading: Hand-Checked Packing, Cartons and Trucking to the Port

    The in-house packing team checks every piece by hand, and containers are trucked to the port with vacuum thermal blankets.

1. What production covers at this factory

Production here starts with bought shell charcoal and ends with a packed carton ready for the container.

Definition

briquette production

Briquette production is the sequence of stations that turns carbonized coconut shell charcoal into packed coconut shell charcoal briquettes: intake checks, milling and sieving, mixing with a binder, forming, oven drying, weathering, quality checks and packing.

The raw material is coconut shell charcoal, bought as carbonized shell charcoal from carbonizers in Sulawesi, East Nusa Tenggara (NTT) and Sumatra. Everything after that happens on this site, at seven stations.

How facts on these pages are confirmed is set out in the editorial and review policy.

2. The seven stations, in order

A briquette passes the seven stations in one direction, and each station has a fact the owner has confirmed for it.

  1. Step 1

    Intake checks

    Before anything is milled. Bought shell charcoal is checked on arrival for moisture below 12%, fixed carbon 82% or more, volatile matter 14% or less, ash content and ash color.

    Raw material and sourcing

  2. Step 2

    Milling and mixing

    Powder, then a mix. The charcoal goes through 4 hammer mills, then a 10 m rotary sieve in 5 cleaning passes. The binder is tapioca starch, typically 1.5–3% of the mix.

    Milling and mixing

  3. Step 3

    Extrusion

    Where the size is set. Forming is extrusion only, with single laser-cut molds. The size tolerance is ±0.3 mm per side.

    Pressing and cutting

  4. Step 4

    Oven drying

    A slow cycle. The pieces are dried in electric ovens, a slow cycle of 48 hours or more, to moisture of 2% at most.

    Drying

  5. Step 5

    Weathering

    A rest before packing. The dried briquettes are weathered for 14 days under cover in the open air, after production and before packing.

    The weathering yard

  6. Step 6

    Quality checks

    What fails a batch. A batch fails on smell or smoke on warming up, high ash, cracks or breakage and inconsistent size or density.

    Quality checkpoints

  7. Step 7

    Packing and loading

    By hand, then to port. The briquettes are packed by the in-house team, who check every piece by hand. Containers are trucked to port with vacuum thermal blankets.

    Packing and loading

Coconut shell charcoal briquettes are made in a fixed sequence: shell charcoal is milled, mixed with a binder, formed and dried, then checked and packed.

3. What each station records, and where it is published

Each station has a place where its results are, or will be, published; a register with no rows yet is named as such.

Stations of briquette production at this factory, what the owner has confirmed for each, and the register its results are published in; registers without rows are named as such. Confirmed in November 2026.
StationConfirmed for this stationRegister its results go to
Intake checks Moisture below 12%, fixed carbon 82% or more, volatile matter 14% or less, ash content and ash colorNone yet
Milling and mixing 4 hammer mills, then a 10 m rotary sieve in 5 cleaning passes; binder: tapioca starch, typically 1.5–3% of the mixNone
Extrusion Extrusion only, with single laser-cut molds; size tolerance ±0.3 mm per sideThe size-deviation log
Oven drying Electric ovens, a slow cycle of 48 hours or more, to moisture of 2% at mostThe batch COA register, moisture column
Weathering 14 days under cover in the open air, after production and before packingThe stuffing and weathering records
Quality checks A batch fails on smell or smoke on warming up, high ash, cracks or breakage and inconsistent size or density; a sample of every batch, about 25 kg of each batch, kept for 5 yearsThe batch COA register and the retained-sample log
Packing and loading Packed by the in-house team, who check every piece by hand; containers trucked to port with vacuum thermal blanketsThe stuffing and weathering records
A caliper measurement of a cube briquette is one kind of production record; moisture and the laboratory values of a certificate of analysis are others.

The limits a batch is held to are the grade bands, the spec ranges this process delivers, under shisha charcoal grade. The registers themselves are gathered on the quality page as quality data: the measurements taken along the way.

4. What is not done here, and what is not published

Two things are missing from this page on purpose: a step the factory does not do, and settings it has not confirmed.

  • Not done here: carbonizing. The factory buys shell charcoal that carbonizers have already produced. Who does what in that chain is set out on the factories, carbonizers and traders page.
  • Not made here. The factory does not make BBQ charcoal, quick-light charcoal, wood charcoal, raw shell charcoal or activated carbon; the reasons are on the page about what it does not make.
  • Not published. Oven temperature and load, sieve mesh, mixing and cutting settings are kept off this site at the owner's choice; the number of lines and the sampling rates are not on file, so they are not stated.

Weathering is the one station set by a carriage rule. The conditions are explained with weathering, and the record kept for each container is on the stuffing and weathering records page.

Questions buyers ask

Which production steps happen at this factory, and which do not?
Everything from the intake of carbonized shell charcoal to the packed carton happens here: intake checks, milling and sieving, mixing with a binder, extrusion, oven drying, weathering, quality checks and packing. Carbonizing the coconut shell does not. The factory buys shell charcoal that carbonizers have already produced.
Why does this site not publish oven temperatures or extruder settings?
Because it publishes only what the owner has confirmed. The stations, the drying time, the moisture target and the intake limits are confirmed facts and appear with their dates. Settings that are not on file are left out, not filled in with typical industry values.
Is the result of every station published?
Not yet. Each station names the record its results go to: the size log for extrusion, the batch COA register for ash and moisture, the stuffing and weathering records for the yard and the container. A record appears on its own page once its first rows are confirmed, and the station page says so until then.

See the factory for yourself

Video audit on request; third-party inspection by the agency of your choice.