Skip to content
PT SCBI

Guide · Production process

Drying Coconut Shell Charcoal Briquettes: The Oven Cycle and the Moisture Gate

This guide is station 4 of 7 in briquette production, and is written for a buyer asking how shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, is dried and which moisture figure applies where. It comes after extrusion and before the weathering yard. Two things are on file: the cycle and the moisture limit.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
3 min read
Briquettes come out of the drying oven on trays; the racks they are moved to belong to the next step, weathering.

Quick answer

How are the briquettes dried, and what moisture must they reach before they leave the oven?

Briquettes dry in electric ovens on a slow cycle of 48 hours or more, to a moisture content of 2% at most. That limit applies to coconut shell charcoal briquettes at the end of the oven cycle, before weathering and packing; it is not a figure for moisture on arrival. Oven temperature and load are not on file. Measured moisture per batch belongs in the batch COA register.

1. What briquette drying is

Drying takes the water out of the formed pieces, in an oven and on a clock.

Definition

briquette drying

Briquette drying is the removal of water from freshly formed briquettes in a drying oven until their moisture content is at or below the limit set for the next step.

The station sits between extrusion and weathering. What is on file for it:

  • The cycle: electric ovens, a slow cycle of 48 hours or more.
  • The moisture limit: 2% at most, when the batch leaves the oven.

How facts on this page are confirmed is set out in the editorial and review policy.

2. The oven cycle

The ovens are electric and the cycle is slow.

The briquettes are dried in electric ovens, a slow cycle of 48 hours or more, to moisture of 2% at most.

Note

Not on file

The oven temperature, the number of ovens and the load per cycle are not on file, so they are not stated here.

One of the criteria that fail a batch is checked on the dried pieces: cracks or breakage. This page states the criterion and claims no cause for it.

Freshly formed briquettes carry the water of the mix, and oven drying removes it before the pieces are weathered and packed.

3. The moisture gate at the end of the cycle

A batch leaves the oven only when it is dry enough, and the limit is one number.

The limit is moisture of 2% at most. It applies at the end of the oven cycle, before weathering and packing. The parameter itself is explained on the moisture page: the moisture range the gate delivers.

Moisture when the container arrives is a different figure, measured later and covered on the moisture-on-arrival page.

Note

Where the measured values go

Measured moisture per batch is a column of the batch COA register, on the batch COA register page. Its confirmed rows are published there.

4. After the oven: weathering is a separate step

Drying ends at the oven door; what follows is weathering, and it is a station of its own.

The briquettes then spend 14 days under cover in the open air, after production and before packing. That is weathering, not drying, and it is described on the weathering yard page.

Each container has its own record of that period, under weathering, on the stuffing and weathering records page.

Questions buyers ask

What heats the drying ovens?
Electricity. The factory dries its briquettes in electric ovens on a slow cycle of 48 hours or more. The oven temperature, the number of ovens and the load per cycle are not on file, so this page does not state them.
What moisture must a batch reach before it leaves the oven?
2% at most. That figure is the factory's stated limit at the end of the oven cycle, before weathering and packing. It is not a promise about moisture on arrival, which has its own page. How the oven moisture is measured, and how often, is not on file yet, so this page does not describe a method.
Are the briquettes dried in the sun?
No. Drying is done in electric ovens, on a slow cycle of 48 hours or more. The 14 days the briquettes then spend under cover in the open air are weathering, a separate step after production and before packing, with its own page and its own record per container.

See the factory for yourself

Video audit on request; third-party inspection by the agency of your choice.