Quick answer
How can a buyer verify this factory before wiring a deposit?
Yes: every fact on the factory page can be checked by a buyer in four steps — registry, bank name, live video, your own inspector. Compare the legal name and identifiers on this page with the registry documents, confirm the proforma invoice account is in that name, book a live walk-through and appoint an inspector before loading. A shisha charcoal supplier refusing any of the four cannot be verified.
1. Check the registration
The legal entity behind this site is registered in Indonesia, and its name, numbers and address are listed here to compare with the documents.
Definition
factory verification
Factory verification is the set of checks a buyer runs before paying a deposit to confirm that a charcoal supplier is the registered manufacturer it claims to be: registry identifiers, bank account in the company's name, a live view of production, and an independent inspection.
-
Step 1
Check the registration
Name, numbers, address. Ask for copies of the NIB and NPWP certificates and compare the registered name, both numbers and the address with the table on this page. Stop on any difference, even a single word.
| Item | As registered |
|---|---|
| Registered name | PT Shisha Charcoal Briquettes Indonesia |
| NIB (business registration number) | 9120405837162 |
| NPWP (tax number) | 0873629415087000 |
| Registered address and factory | Jl. Magelang–Purworejo Km 11, Jambu, Punduhsari, Tempuran, Magelang Regency, Central Java 56161, Indonesia |
The NIB is issued through Indonesia's OSS licensing system, and company deeds are recorded in AHU Online at the Ministry of Law. The factory is PT Shisha Charcoal Briquettes Indonesia, in Tempuran, Magelang Regency, Central Java, Indonesia. Each identifier, and where it appears on the documents, is covered with the identifiers to match against the documents.
Note
A registry record proves that the company exists, not what it ships. What it ships is shown batch by batch in the batch register you can check against.
2. Match the bank account to the legal name
One check stops most deposit fraud: the account name on the proforma invoice must equal the registered company name.
-
Step 2
Match the bank account
Account name = legal name. Before any deposit, confirm that the account on the proforma invoice is in the registered company name shown on this page, at the bank and account number listed here.
| Item | Details |
|---|---|
| Account name | PT Shisha Charcoal Briquettes Indonesia |
| Bank | Bank Central Asia Tbk (BCA) |
| SWIFT code | CENAIDJA |
| Account number | 122-2368777 |
Important
Pay only into the account in the name PT Shisha Charcoal Briquettes Indonesia. If an invoice or a message gives a different account, whether personal, another company's or an agent's, stop and confirm it by voice on the WhatsApp number on this site before you pay.
On a first order the deposit is a 50% deposit, with the balance before stuffing, so this is the check to run before the first transfer. The full terms are on the payment terms and proforma invoice page.
3. Book a live video walk-through
A live walk-through shows that the production floor exists, belongs to the company you are paying, and is working today.
-
Step 3
Book a live walk-through
Live, not recorded. Ask the export desk for a live video call from the production floor, and ask for it to run unbroken from the gate to the packing line.
Live video audits and factory visits are welcome. A call covers the shell charcoal stock, milling and mixing, pressing, drying, the weathering area and packing, with the people who run each station.
Book it with the Export Sales Manager, Irfan Maulana by WhatsApp or email; replies come within 15 minutes during working hours (WIB), or the next working day outside them. Ask for a live call rather than a recording, and for the camera to move from the gate to the packing line without a cut: a recording cannot show that the floor is in use today. The stations to ask for, and the way to the factory, are on the video audit and visits page.
4. Send your own inspector
An inspector you appoint checks the goods and the container before loading, which is the last point a problem can be fixed at origin.
-
Step 4
Send your own inspector
Before the container is loaded. Appoint an inspection agency to check the goods and the empty container before loading, briefed on the grade, the size tolerance and the packing specification.
Buyers' third-party inspectors are welcome before shipment; the factory pays for the pre-shipment inspection. Agencies such as SGS, Intertek or Sucofindo run this inspection in Indonesia; the choice of agency is yours.
- The grade: the ash band it is sold to, checked on a sample drawn from the cartons.
- The size: the nominal size of the shape, within ±0.3 mm per side.
- The packing: inner boxes, master cartons and marks against the proforma invoice.
- The container: empty, dry, clean and sound before the first carton goes in.
Time the visit for after the 14-day weathering hold and before stuffing; the stuffing and weathering records page explains the hold. An inspection proves the lot it inspected, not the next one.
5. Ask for references and check the records
References and published records answer different questions: a reference speaks for its own orders, and a record speaks for a batch.
Customer references for serious buyers, on request. Ask what was ordered, how often, and whether any container drifted from its specification.
Records are published on the records pages as batches and containers are recorded, and each quoted batch can be checked against the batch register. How facts on this site are confirmed and dated is set out in the editorial and review policy.
6. What a trading company cannot show you
The four checks work on any supplier, and a trading company presenting itself as a factory fails at least one of them.
| Check | A factory | A trading company |
|---|---|---|
| Registration | NIB and tax number in its own name, matching the documents | Documents in another company's name, or none |
| Bank account | Account name equals the registered name | An account in another name, or a personal account |
| Live walk-through | A live call from its own production floor | "The factory is far away", or a recorded video |
| Inspection | Your inspector is welcome before loading | "Not necessary", or only after payment |
| Batch records | Per-batch records in its own name | Forwarded PDFs with another name on them |
A trader is not wrong to trade; it is wrong to present itself as the factory. When the checks pass, start with a sample and its batch COA. If you are replacing a supplier or adding one, the path for switching or adding a second source starts from these checks.
Questions buyers ask
Can I verify your registration number myself?
Do you accept payment to a personal or third-party bank account?
What will I see on a video walk-through, and how long does it take?
Can my inspector visit before the container is loaded?
Sources
- Online Single Submission (OSS) — business licensing and NIB (opens in new tab), Ministry of Investment / BKPM, Republic of Indonesia — accessed
- AHU Online — company legal-entity records (opens in new tab), Directorate General of General Legal Administration, Ministry of Law, Republic of Indonesia — accessed