Skip to content
PT SCBI

Guide · Quality

Pieces per Kilogram and Net Weight: How Shisha Charcoal Is Counted, Weighed and Claimed

This guide belongs to the quality section, beside its quality data, and sets the count of pieces against the weight you pay for. It is written for an importer or brand owner of shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, whose customers count the pieces in a box. The factory sells by net weight, and the count is nominal.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
5 min read
Shisha charcoal is pressed as cubes of 25–28 mm, flats and hexagonal pieces; the cube size sets the number of pieces per kilogram.

Quick answer

Is shisha charcoal sold by weight or by count, and what happens if the weight is short?

The factory sells by net weight; the count per kg is a nominal figure set by the cube size, not a guarantee for each carton. Nominal counts for shisha charcoal cubes run from 72 pieces per kg at 25 mm to 48 at 28 mm. A quantity claim must be raised within 7 days of arrival of the container at the buyer's warehouse.

1. Net weight and count: what you buy

You buy a weight of charcoal, not a number of pieces.

Definition

net weight

Net weight, for coconut shell charcoal briquettes, is the weight of the briquettes alone, without the liner, the inner box, the master carton or a pallet; gross weight includes them.

The price list is stated in USD per metric ton, and the container loads on this site are net weights. The count per kilogram describes the size of a piece; it is not the unit of sale. How the price is built is explained under FOB price.

2. Nominal pieces per kg, by size

A nominal count is on file for 6 of the 12 lines on the product list.

Nominal pieces per kilogram of coconut shell charcoal briquettes at this factory, by shape and size, as stated by the owner in November 2026; nominal packing counts, not measured counts.
Shape and sizeNominal pieces per kg
Cube, 22 mm 96
Cube, 25 mm 72
Cube, 26 mm 64
Cube, 27 mm 54
Cube, 28 mm 48
Lotus (three leaves), 15×25 mm 72
Cube with hole, hexagonal, finger (stick), octagonal, flat and dome Not on file

Each size has its box, carton and container load on the shapes and sizes page, under briquette shape: the nominal counts per shape.

A nominal count per kilogram follows from the size of the piece: the smaller the cube, the more pieces make up a kilogram.

3. Why the count in a box moves

The count in a box moves because pieces are not all exactly the same size, and a box is sold by its weight.

The stated size tolerance is ±0.3 mm per side. A cube at the top of that tolerance has more volume than one at the bottom, so fewer of them make up a kilogram.

Volume of a cube at each end of the stated size tolerance (±0.3 mm per side), as a percentage of its volume at the nominal size; geometry computed from the tolerance, not a measurement.
Cube sizeAt the bottom of the toleranceAt the top of the tolerance
Cube 25 mm 96.4%103.6%
Cube 26 mm 96.6%103.5%
Cube 27 mm 96.7%103.4%
Cube 28 mm 96.8%103.2%

Density and moisture move the count as well, and neither is stated here. Measured counts are not published yet; once they are on file they are added to the table in section 2, beside the nominal ones. Measured sizes belong to the size log: the caliper log of measured sizes.

4. How boxes and cartons are filled

What is on file about packing is who packs and what the packs are; how each box is weighed is not.

  • Packing. The briquettes are packed by the in-house team, who check every piece by hand (packing line).
  • Inner units. 1 kg, 500 g and 250 g (inner box).
  • Master cartons. 10 kg and 20 kg (cube 25, 26 and 28 mm); the 10 kg cartons for 22, 25, 26 and 27 mm cubes hold 1 kg inner boxes (master carton).
An inner unit is sold by its net weight, so the number of pieces inside follows from the size of each piece.

Note

Not on file

  • How each inner box is weighed at packing.
  • The allowance on the net weight of a box.
  • The weight of the box, the liner and the master carton.
  • Whether the packing list states net and gross weight for each carton.

5. Checking count and weight on a delivery

A buyer can check count and weight on arrival with a checked scale and a note of the carton marks.

  1. Choose cartons from different parts of the load, not only the ones nearest the door.
  2. Write down the marks on each carton you open.
  3. Take the briquettes of one inner box out of the box and the liner, and weigh them.
  4. Count the pieces of that box.
  5. Compare the weight with the net weight of the inner unit you ordered.

The same count is part of the sample test you run before an order: the sample test protocol.

6. If the weight is short

A claim about quantity has to be raised within 7 days of arrival of the container at the buyer's warehouse.

  • Remedy. Credit or discount on the next order.
  • What to send. The weights, the counts and the carton marks you recorded. The list of evidence a quantity claim needs is not on file.

The procedure is set out under claims process: how a weight shortfall is claimed.

How facts on this page are confirmed is set out in the editorial and review policy.

Questions buyers ask

Is the number of pieces per kilogram guaranteed?
No. The count is nominal: a packing count that follows from the size of the piece. The factory sells by net weight, and the stated size tolerance is ±0.3 mm per side, so the count in a given kilogram can sit above or below the nominal figure.
Why does a box hold more or fewer pieces than the nominal count?
Because a box is sold by its weight, not by a count. A piece at the top of the size tolerance is larger and heavier than one at the bottom, so fewer of them make up the same weight. A measured count per size is not published yet.
How do I check the net weight of a delivery?
Open a few cartons from different parts of the load, take the briquettes out of the box and the liner, and weigh them on a checked scale. Note the carton marks of each carton you weigh. A quantity claim has to reach the factory within 7 days of arrival of the container at the buyer's warehouse.

Test before you commit a container

Samples ship with the batch COA; third-party inspection on request.