Skip to content
PT SCBI

Guide · Quality

Certificates and Laboratories for Our Shisha Charcoal: Who Tests It and How to Verify a Report

This page belongs to the quality section and covers who tests this factory's shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, and which certificates the factory holds. It is written for the buyer or quality manager who checks a supplier's reports before a first order. It names the laboratory, gives the route to verify its report and states what is on file.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
4 min read
Every sample ships with the certificate of analysis of its batch, a laboratory report a buyer can verify by its number.

Quick answer

Which laboratory tests this factory's shisha charcoal, how is its report verified, and which certifications does the factory hold?

Carsurin's Semarang laboratory tests a sample of each order for the batch COA; the factory holds no certification yet, and ISO 9001 is in progress. Each report can be checked with the laboratory by its number, and the methods and accreditation it prints are copied into the batch COA register of these coconut shell charcoal briquettes.

1. Who tests the charcoal

The laboratory results on this site come from one outside laboratory, which tests a sample from each order.

The reports on file are issued by Carsurin Tbk (Semarang laboratory, Central Java). The factory's practice is a COA from the laboratory for each order, so the shipment of each order has its own batch COA.

The laboratory tests moisture, ash and volatile matter by ASTM D1762-84 (2021) and calculates fixed carbon. Its reports print KAN accreditation LP-415-IDN for ISO/IEC 17025:2017. The batch COA register copies each report's values as received, the reporting basis of the report's first column, and how to read a report line by line is on how to read our COA. How facts on this page are confirmed is set out in the editorial and review policy.

2. How to verify a report

A report is verified with the laboratory that issued it, not with the factory that sends it.

Definition

laboratory verification

Laboratory verification is the check, made with the laboratory that issued a test report, that the report is genuine and unaltered: that its number, date, sample and results match the laboratory's own record.

  1. Step 1

    Read the report

    Number, date, laboratory. Note the report number, the date of issue and the laboratory named on the copy you were sent.

  2. Step 2

    Ask the laboratory

    By the report number. Send that number to the laboratory and ask it to confirm the date, the sample and the results it issued under it.

  3. Step 3

    Check the accreditation

    As printed. Ask the laboratory or the accreditation body to confirm that the accreditation printed on the report, KAN accreditation LP-415-IDN for ISO/IEC 17025:2017, covers the tests it states.

  4. Step 4

    Compare the values

    Line by line. Set the values the laboratory confirms beside the copy you hold; a difference means the copy is not the report the laboratory issued.

A laboratory report is verified by quoting its number to the laboratory that issued it.

For the report on file, the route is as follows: Carsurin report no. 1911CC/11-26, checked manually by the Carsurin office; written confirmation letter requested. Every document the factory holds is listed with an independent route to verify it in the documents we hold and how to verify each, the factory's document library.

3. Certificates the factory holds

The factory holds no certification yet, and ISO 9001 is in progress.

A certificate is named on this site only once its scan is on file and has been checked with the body that issued it, and it is then listed with its number, its issuer and its expiry date. Until then it is not claimed, however close it is to being issued, and no date is given for it.

Important

A laboratory's accreditation is not the factory's certificate

The accreditation printed on a laboratory report belongs to the laboratory: it covers how the laboratory tests, not how the factory works. It is never presented on this site as a certificate of the factory.

The certificates and claims this site does not make are listed in the claims register, on the page about the certificates and claims we never make.

4. What to ask for before you order

Three requests let you test what this page states against your own checks before a first order.

Note

Ask the export desk for

  • The latest report. The laboratory report of a recent shipment, with other buyers' details masked, to verify with the laboratory as above.
  • A sample with its COA. Every sample ships with its batch certificate of analysis (COA), so your own laboratory can test the same batch; samples are requested on the samples page.
  • An inspection before shipment. Buyers' third-party inspectors are welcome before shipment; the factory pays for the pre-shipment inspection. Book it with 3 working days' notice, as set out on the pre-shipment inspection page.
An approved sample is sealed in two halves, one for the buyer and one for the factory, so later reports and tests can be checked against it.

A report, a sample and an inspection are three separate checks: the report states the laboratory's results for a shipment, the sample lets you test production yourself, and the inspection looks at the goods before they are loaded.

Questions buyers ask

How do I check that a laboratory report is genuine?
Quote the report number to the laboratory that issued it and ask it to confirm the report. Each report the factory holds is listed in the document library with its verification route.
Is the laboratory that tests your charcoal accredited?
Its reports print KAN accreditation LP-415-IDN for ISO/IEC 17025:2017. Ask the laboratory, or the accreditation body, to confirm that the accreditation covers the tests on your report.

Test before you commit a container

Samples ship with the batch COA; third-party inspection on request.