Quick answer
How is this factory's shisha charcoal kept dry in the container, and what should I check when the doors open?
Briquettes leave the ovens at 2 % moisture at most, packed in liners with silica gel; photograph any damp cargo when the doors open. Each container of these coconut shell charcoal briquettes also gets dry bags on its side walls and kraft paper on the floor, and its weathering days and packing temperature are recorded on the stuffing day.
1. What moisture on arrival is
Moisture on arrival is damp found in a container when its doors are opened at destination.
Definition
moisture on arrival
Moisture on arrival is dampness found in a container of charcoal when its doors are opened at destination, from moisture in the cargo, in the packaging or in the air inside the container.
Damp can come from the charcoal, from the packaging, or from the air shut inside the container, which can leave droplets on the ceiling and walls when the temperature changes on the voyage. Each source is checked at a different point, so this page follows the charcoal from the oven to the doors.
How facts on this page are confirmed is set out in the editorial and review policy.
2. How the charcoal is kept dry
The briquettes are dried in electric ovens, a slow cycle of 48 hours or more, to moisture of 2% at most, and the moisture is measured with a moisture meter on every oven load.
They then weather under cover in the open air, after production and before packing, for 14 days, and are packed at 40 °C at most. The weathering days and packing temperature of every container are recorded on the stuffing and weathering records of each container.
In the cartons the briquettes sit in a liner, an HD plastic bag, 5 micron, with 1 g silica gel. The boxes, cartons and liners are set out on the liner and carton that keep moisture out.
3. Inside the container
Each container gets dry bags and a floor lining, and its loading is recorded on the stuffing day.
It carries 6 dry bags of 1 kg in a 20 ft container and 10 in a 40 ft, hung on the side walls, with kraft paper on the container floor. Dunnage: pallets when the load is palletized; none when the cartons are floor-stacked.
The newest stuffing record, for the container stuffed on November 10, 2026, shows 15 days of weathering, 34 °C at packing and 32 cm of headspace above the cartons. Photographs of the load are taken and sent to the buyer, so the state of the load at the factory can be set beside what you find.
4. When the doors open
Photograph before anything is moved, in the order the doors show the load.
-
Step 1
The seal and the doors
Before opening. Photograph the seal with its number and the closed doors, so the container is shown as it arrived.
-
Step 2
The first view
As the doors open. Photograph the load as the doors swing open, before anyone steps in or moves a carton.
-
Step 3
Ceiling, walls and dry bags
Where damp shows. Photograph the ceiling and the walls for droplets, and the dry bags hanging on the side walls.
-
Step 4
Damp cartons
With their marks. Photograph any damp or stained carton with its carton marks visible, and note where in the load it sat.
A claim about quality is raised within 14 days of arrival of the container at the buyer's warehouse. Send the photographs with the container number and the carton marks; the steps are on how to file a moisture claim.