Skip to content
PT SCBI

Guide · Factory

Virtual Tour of Our Shisha Charcoal Factory: The Seven Stations in Order, in Photos and Video

This page belongs to the factory section and walks through the factory that makes this shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, station by station. It is written for the buyer who cannot visit yet, or who wants to know what to ask for on a live video audit. It follows the seven stations in the order the charcoal moves.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
3 min read
Coconut shell charcoal briquettes are pressed from carbonized coconut shell powder and a starch binder at factories in Indonesia and exported by the sea container.

Quick answer

What does this factory look like, station by station, before I visit or book a live video audit?

The tour follows the factory's 7 production stations in order, from raw material to container loading; photos and video are added as each is filmed. Each station at this maker of coconut shell charcoal briquettes links to the page that states what is confirmed there, and a live video audit or a visit shows the same stations in real time.

1. How the tour works

The tour follows the seven production stations in the order the charcoal moves through them.

Definition

virtual tour

A virtual tour, on this site, is a walk through the factory's production stations in order, in photos and video, for a buyer who cannot visit.

The factory stands in Magelang Regency, Central Java. Each station below links to its own page, which states what is confirmed there. The walk-through video and the photos of each station are added as they are filmed, and each shows a placeholder until then.

A walk through the factory's seven production stations in order, from the raw material store to container loading.
Raw material: shell charcoal bought ready carbonized and checked on arrival.
Milling: the ground charcoal cleaned in a rotary sieve.
Mixing: the charcoal mixed with a tapioca starch binder.
Pressing and cutting: briquettes formed by extrusion through laser-cut molds.
Drying: the moisture of an oven load checked with a moisture meter.
Weathering yard: briquettes on racks under cover before packing.
Quality checkpoints: size checked with a caliper at the QC table.
Loading: cartons stacked in the container, with headspace left above them.

How facts on this page are confirmed is set out in the editorial and review policy.

2. From raw material to extrusion

The first three stations turn bought shell charcoal into formed briquettes.

  1. Raw material and sourcing. Shell charcoal is bought ready carbonized from Indonesian carbonizers and checked on arrival for moisture, fixed carbon, volatile matter, ash content and ash color.
  2. Milling and mixing. Shell charcoal is ground in hammer mills, cleaned in a rotary sieve, then mixed with a tapioca starch binder before extrusion.
  3. Pressing and cutting. Briquettes are formed by extrusion only, through single laser-cut molds, to a stated size tolerance of ±0.3 mm per side.

The whole line, with what is confirmed and what is not, is on what happens at each station.

3. The ovens and the weathering yard

The next two stations take the moisture out of the briquettes and let them rest before packing.

  1. Drying. Briquettes dry in electric ovens on a slow cycle of 48 hours or more, to a moisture content of 2% at most.
  2. Weathering yard. Briquettes spend 14 days under cover in the open air after production and before packing; the production and packing dates are recorded for every container.

The days each container spent in the yard, and its temperature at packing, are on the stuffing and weathering records.

4. Checks, packing and loading

The last two stations check the briquettes and put them into the container.

  1. Quality checkpoints. A batch fails for smell or smoke on warming up, high ash, cracks or breakage, or inconsistent size or density.
  2. Packing and loading. The in-house packing team checks every piece by hand, and containers are trucked to the port with vacuum thermal blankets.

The checks behind those criteria are published as logs: the size log, the drop-strength log and the batch COA register.

5. See it live

Live video audits and factory visits are welcome, and the stations on this page are the ones to ask for.

A live video walk-through lets a buyer see a station in real time and ask for the next one.

What a call covers, and how to book one, is on the page for booking the live version.

Questions buyers ask

Can I see the factory live instead of on video?
Yes. Live video audits and factory visits are welcome; the stations on this page are the ones to ask for.
Why are some photos still to come?
Each photo and the walk-through video are added as they are filmed; a station shows a placeholder until then.

See the factory for yourself

Video audit on request; third-party inspection by the agency of your choice.