Skip to content
PT SCBI

Guide · Shipping

Shisha Charcoal Container Stuffing: Empty-Container Checks, Packing Temperature, Headspace and the Record

This guide belongs to the shipping section and is written for a buyer, or a buyer's inspector, who wants to know how a container of shisha charcoal, the hookah charcoal or hookah coals of US and Canadian buyers, is prepared and loaded. The loading follows weathering. The page states what the factory has confirmed and marks what is not on file.

Written by
Henry Sinaga
Reviewed by
Dimas Setyawan,
Updated
Reading time
6 min read
A container is inspected empty — dry, clean, odor-free and without holes — before charcoal is loaded.

Quick answer

How is a container of shisha charcoal prepared, loaded and recorded at this factory?

Containers are stuffed after 14 days of weathering, at 40 °C or less, with 30 cm of headspace, and an independent surveyor inspects the load. Recorded for every container: date of production, date of packing and temperature on the day of packing. A 20 ft container of shisha charcoal holds 18.5–20 t net, by shape. Your own inspector can attend before shipment.

1. What stuffing covers

Stuffing is the loading of the packed cartons into the container, and it comes after weathering and packing.

Definition

container stuffing

Container stuffing is the loading of cartons into a sea container, including inspection of the empty container, product temperature and weathering checks, dunnage, headspace, photographs and sealing.

At this factory the order is fixed. The charcoal is weathered, then packed with its temperature recorded. The cartons are loaded with headspace left above them, a surveyor inspects the load, and the container is trucked to the port.

How facts on this page are confirmed is set out in the editorial and review policy.

2. Before the container arrives

Three things are settled before a container reaches the factory.

  • Weathering is complete. The briquettes have spent 14 days under cover in the open air, after production and before packing.
  • The cartons are packed. The briquettes are packed by the in-house team, who check every piece by hand.
  • The container is booked as dangerous goods. Charcoal travels as UN 1361, Class 4.2, and the term of sale decides who makes the booking.

The packing itself is on the packing and loading page, and the booking on the incoterms page.

3. Inspecting the empty container

An empty container is checked before anything is loaded, and an international code of practice lists what to look for.

Checks on an empty freight container before packing, from chapter 8.2 of the IMO/ILO/UNECE Code of Practice for Packing of Cargo Transport Units (CTU Code, MSC.1/Circ.1497, 2014); a general code of practice, not this factory's own checklist.
What is checkedWhat to look for
Safety approval plate The plate is fixed to the container, and its next examination date has not passed
Structure Frame, walls and roof are in good condition: not significantly distorted, cracked or bent
Doors The doors work, can be locked and sealed, and the door gaskets are in good condition
Interior No major damage, broken flooring or protruding nails and bolts; no liquids or persistent stains
Weatherproof With the doors closed, no light enters the container
Cleanliness Clean, dry, and free of residue and persistent odors from previous cargo
Old labels Labels, placards and marks from a previous cargo are removed

At this factory, the empty container is checked and photographed before loading.

Note

Not on file yet

The factory's own checklist for this step is not on file, so the table above is the code's list and not the factory's. A buyer's inspector can run the same list.

4. Loading: temperature and load

Two things about the load are on file: the temperature of the charcoal and the weight that goes in.

The temperature of the charcoal is recorded on the day of packing, and it is 40 °C at most.

A full 20 ft container holds 18.5–20 t net, by shape, and a 40 ft 26.5 t. The load of each shape is on the packaging page, and the cartons on the master cartons page.

Master cartons of shisha charcoal are stacked in the container with clear space left between the top tier and the roof.

Pallets are available, to ISPM 15. A palletized 20 ft container holds 16,000 kg net. The stacking pattern and the dunnage are not on file, so they are not described here.

5. Headspace and the seal

Headspace is the one dimension of the stow that the carriage rule fixes.

This factory stows with 30 cm of headspace above the cartons.

Important

The carriage condition

Special provision 978 sets carriage conditions for UN 1361 charcoal; it is not an exemption. Unless the competent authority approves otherwise, the material is weathered under cover for at least 14 days before packing (or steam-treated and packed under inert gas), packed at no more than 40 °C, and stowed with at least 30 cm of headspace, and the dangerous goods document states the production date, packing date and packing temperature.

Source: Resolution MSC.556(108): Amendments to the IMDG Code, special provision 978 and 5.4.1.5.18 (opens in new tab), International Maritime Organization (IMO), accessed

When loading ends, the doors are closed and sealed. The seal number is written on the bill of lading, so the seal can be checked against it on arrival.

Once the doors are closed, a numbered seal is fixed to the container, and that number is written on the bill of lading.

Photographs of the load are taken and sent to the buyer. At which points of the loading they are taken, and when they are sent, is not on file.

The marks on the container are covered on the marks, labels and placards page.

6. The record written for every container

The record of a container has two parts: the items the dangerous goods document must state, and the items of the stuffing itself.

  • Date of production, for the dangerous goods document
  • Date of packing, for the dangerous goods document
  • Temperature on the day of packing, for the dangerous goods document
  • The headspace, at stuffing
  • The seal number, at stuffing

The published register is the record kept for every container. Its first rows are being collected. How each condition maps to a record is on the UN 1361 compliance page.

Note

Not on file yet

  • Who writes the record, and when.
  • The records and the photographs themselves, which are still to be sent for the register.

7. Your inspector on stuffing day

Two outside parties can look at the load before it leaves: your inspector and an independent surveyor.

  • Your inspector. Buyers' third-party inspectors are welcome before shipment; the factory pays for the pre-shipment inspection.
  • The surveyor. An independent surveyor inspects the load before shipment; the factory pays, inside the FOB price.

Brief your inspector to check five things: the empty container against the list above, the temperature record, the headspace, the carton count against the packing list, and the seal number. Stuffing is inside the FOB price.

The inspection itself is set out on the pre-shipment inspection page: where your inspector fits on stuffing day.

Questions buyers ask

Is the container floor-loaded or palletized?
Either. The loads on this site are for cartons loaded without pallets. Pallets are available, to ISPM 15, and a palletized 20 ft container carries 16,000 kg net, less than a floor-loaded one, because the pallets take space and weight. The proforma invoice states which one your order uses.
Why must there be space above the cartons?
Because the carriage rule asks for it. Special provision 978 of the IMDG Code requires at least 30 cm of headspace above charcoal in the container, unless the competent authority approves otherwise. This factory stows with 30 cm, and the headspace is written down for each container.
Can my inspector attend the stuffing?
Yes. Buyers' third-party inspectors are welcome before shipment; the factory pays for the pre-shipment inspection. Tell the export desk when you pay the deposit, so the loading date and the inspector's booking fit. Separately, an independent surveyor inspects the load before shipment, and the factory pays for that inside the FOB price.

Sources

  1. IMO/ILO/UNECE Code of Practice for Packing of Cargo Transport Units (CTU Code), MSC.1/Circ.1497 (opens in new tab), International Maritime Organization — accessed
  2. Resolution MSC.556(108): Amendments to the IMDG Code, special provision 978 and 5.4.1.5.18 (opens in new tab), International Maritime Organization (IMO) — accessed

Will your container be accepted?

We prepare the DGD, weathering certificate, SDS and packing list before loading.