Quick answer
Which dangerous goods marks are on this factory's cartons, and which placards go on the container?
Cartons are printed with UN 1361 and the Class 4.2 label; the IMDG Code requires Class 4.2 placards and the UN number on the container. A container of these coconut shell charcoal briquettes holds 18.5 t or more of one dangerous good, well above the 4,000 kg threshold, so its UN number is displayed with the placards.
1. What dangerous goods marking is
Dangerous goods marking identifies the cargo to everyone who handles it, on the carton and on the container.
Definition
dangerous goods marking
Dangerous goods marking is the set of marks, labels and placards that identify dangerous goods on packages and on the container that carries them: the UN number, the hazard class label and, on the container, placards.
Charcoal ships as UN 1361, Class 4.2: IMDG Code Amendment 42-24, adopted by IMO Resolution MSC.556(108), entered into force on 1 January 2026. Under it, charcoal ships by sea as UN 1361, CARBON, animal or vegetable origin, Class 4.2, packing group II or III.
How facts on this page are confirmed is set out in the editorial and review policy.
2. On the cartons
The label panel the factory prints carries the dangerous goods marks beside the trade marks.
UN 1361 and the Class 4.2 label are printed on the master carton only; the inner boxes do not carry them.
Note
Printed on the label panel
- UN 1361, a dangerous goods mark.
- The Class 4.2 label, a dangerous goods mark.
- The net weight.
- Made in Indonesia.
- The batch number, on the buyer's request.
- The buyer's brand.
The 10 kg master cartons are UN-certified packaging, marked 4G/Z11.8/26/RI/SCBI; the certificate on file does not cover the 20 kg cartons.
3. On the container
The IMDG Code sets the placards a container of dangerous goods must show, and the UN number joins them on a full load.
A container carrying dangerous goods in packages by sea shows placards of at least 250 mm × 250 mm, one on each side and one on each end; when a single dangerous good of more than 4,000 kg gross makes up the load, its UN number is displayed as well. (Check the current IMDG Code edition with your forwarder.)
Source: Container Handbook, section 3.8: Marking of containers carrying dangerous cargoes (opens in new tab), German Insurance Association (GDV), accessed
A container of this factory's charcoal holds between 18.5 t and 26.5 t of one dangerous good, so the UN number is displayed with the placards. The container is stuffed at the factory, as vanning (container stuffing) is part of its work up to the vessel. The placards are fixed by the factory staff.
Photographs of the load are taken and sent to the buyer; ask for one showing the placarded container doors if you need it for your records.
4. What to check
On arrival, the marks on the cartons and the container match the declaration.
-
Step 1
The master cartons
Every master carton. UN 1361 and the Class 4.2 label on each master carton; the inner boxes carry neither.
-
Step 2
The container
Sides and ends. Class 4.2 placards on each side and each end, and the UN number with them.
-
Step 3
The declaration
Same entry. The same UN number and class as on the dangerous goods declaration for the container.
-
Step 4
Anything missing
With photos. Photograph any missing or damaged mark and send the photos to the export desk.
The entries the marks must match are on the dangerous goods declaration, and how the factory meets the rest of the UN 1361 rules is on how this factory complies.
Questions buyers ask
Why do the cartons carry a Class 4.2 label?
Do the inner boxes carry the UN marks?
Sources
- Resolution MSC.556(108): Amendments to the International Maritime Dangerous Goods (IMDG) Code (opens in new tab), International Maritime Organization (IMO) — accessed
- Container Handbook, section 3.8: Marking of containers carrying dangerous cargoes (opens in new tab), German Insurance Association (GDV) — accessed